NukaTap Mini - Wall Mount Shank Kit - duotight Adaptor 8 mm

The Wall Mount Shank Kit is specifically designed for the Nukatap Mini taps, this kit allows you to easily connect your tap to any cooler box, kegerator, keg fridge, coolroom wall, or flat surface, making it a versatile addition to your setup.

Innovative Design for Optimal Performance

Unlike traditional bulky 5/8" bar stock shanks that act as heat sinks, this innovative shank kit ensures minimal temperature loss. The beer line feeds directly up to the back of the tap, significantly reducing the volume of non-refrigerated beer and preventing the "first pour foam" effect, which can waste beer and impact its quality.

Secure and Fixed Installation

One of the standout features of this shank kit is its secure installation method. Traditional long shanks often rotate during use, causing frustration. This kit uses three screws to lock the tap into a fixed position, ensuring it remains stable. You can still adjust the tap orientation by loosening the stainless steel collet, which features interlocking teeth that secure the tap once tightened.

Easy Installation on Any Wall Thickness

The Nukatap Mini Shank Kit simplifies the installation process. Unlike other kits requiring large drill holes, this kit only needs an 8mm conventional drill bit, making it easier and more convenient to install. For walls thicker than 80mm, simply use longer screws from any hardware store. The included screws have "snap off" points, allowing customization for thinner walls.

Specifications

• Beer Line Diameter: Compatible with any EVABarrier beer line with an 8mm ID, such as 4mm x 8mm or 5mm x 8mm.
• Materials: 304 Grade Stainless Steel collet and screw cover, dual o-ring Silicone/EPDM combination, POK plastic mounting.
• Temperature Range: -10°C to 100°C
• Max Pressure: 150psi