Nitrogen Adaptor for 360 Actuator

Enhance your Nitro Coffee or Stout dispensing setup with our Nitrogen Adaptor, designed for seamless compatibility with the Mini 360 Core Actuator Regulator and a N2 Cylinders. This G1/2" Male x M10 Female adaptor ensures a secure and efficient connection, perfect for professional and home brewers alike.

Directions for Use:

1. Preparation: Remove the gas bulb-reducing bush from the Mini 360 Core Actuator Regulator if it is present.
2. Connection: Screw the G1/2" Male x M10 Female adaptor into the Mini 360 Core Actuator Regulator and tighten with a spanner.
3. Attachment: Connect the Nitrogen cylinder valve to the regulator. Use a spanner to hold the neck of the Nitrogen cylinder while attaching and detaching the regulator to prevent overtightening.
4. Activation: Screw the thumbscrew on the Mini 360 Core Actuator Regulator in to depress the valve on the Nitrogen Cylinder.
5. Adjustment: Set the desired outlet flow/pressure on the regulator. To turn off the gas, the regulator must be removed from the cylinder.
6. Safety Check: Perform a leak test on your system to ensure all connections are secure.

Important Note: When removing the regulator, always use a spanner to hold the brass neck of the cylinder. Failure to do so may result in the adhesive glue cracking and the cylinder detaching from the fitting.

Specifications:

• Connection Type: G1/2" Male x M10 Female

Please note: Regulator and gas canister are not included.