Ferminator Basic Kit 2 with Fermzilla 27 L and Graviator

Ferminator Basic Kit 2 – Essential Fermentation Control

The Ferminator Basic Kit 2 is an advanced fermentation unit that includes the FermZilla 27L and the Graviator WiFi Hydrometer. Designed to provide full control over the fermentation process, this system is ideal for both beginners and experienced brewers looking to optimise their brewing setup.

Precision Fermentation with Temperature Stability

The Ferminator Basic Kit 2 maintains a precise and stable fermentation temperature. At room temperature (20°C), it can cool down to 0°C and heat up to 50°C.*

This unit allows for lager and pilsner fermentation at the correct low temperatures or ale fermentation at higher temperatures to enhance ester production. The Ferminator ensures consistent temperature control throughout the fermentation process, helping to prevent off-flavours and ensuring the yeast remains active. With the Ferminator Basic Kit 2, you gain full control over fermentation, allowing you to experiment with new flavour profiles.

The WiFi module is locked by default but can be unlocked easily upon request. Contact us for more details.

Technical Specifications

Cooling and Heating Unit:

• Lowers temperature up to 20°C below ambient temperature.
• Raises temperature up to 30°C above ambient temperature.
• Built-in fan circulates air for even temperature distribution.
• Easy-to-program control unit displaying actual and set temperatures.
• Temperature sensor can be attached directly to the fermenter.
• Max power consumption: 80W, Standby mode: 1W.

Expansion Module:

• Height: 22 cm.
• Can be expanded with additional modules and an extra cooling/heating unit at the back.
• Modular design allows for compact storage when not in use.

Ferminator Basic Kit 2 Dimensions:

• 560mm (L) x 560mm (W) x 1091mm (H)

FermZilla Gen 3.2 - 27L Tri-Conical Uni Tank

The FermZilla Gen 3.2 is a game-changing conical fermenter, designed with tri-clamp technology for a more user-friendly experience. It offers many of the benefits of high-end stainless steel conical fermenters at a fraction of the price. The transparent PET design allows brewers to visually monitor fermentation, and it supports pressure fermentation up to 2.4 bar.

What’s New in FermZilla Gen 3.2?

• ✔ 3" Tri-Clamp integrated into the tank body.
• ✔ 3" to 2" Tri-Clamp Butterfly Valve.
• ✔ 3" Tri-Clamp Compatible Collection Container.

Easy Cleaning & Maintenance

The new PET conical fermenter is even easier to disassemble and clean. Simply release all pressure and loosen the tri-clamp for quick access.

What’s Included in the Starter Kit?

• 1 x 27L FermZilla Tri-Conical Base Kit (Unassembled)
• 1 x 27L Gen3 Tri-Conical Tank with Metal Neck Ring
• 1 x Standard Top Lid with Red PRV (35 psi)
• 2 x Male PCO1881 Carbonation Valves
• 4 x Pre-drilled accessory ports on the lid
• 1 x Collar Locking Ring
• 1 x Black Rubber Stopper for PCO1881 Cap
• 1 x Blank PCO1881 Black Cap
• 1 x Premium 3-Piece Airlock
• 1 x 3” Tri-Clamp to 2” Tri-Clamp Butterfly Valve
• 1 x 1000mL Collection Container & Lid
• 2 x Blank PCO1881 Black Caps
• 1 x BrewBuilt Flex Container Lid with 2” Tri-Clamp Ferrule
• 1 x 3-Piece 3” Tri-Clamp with Silicone Gasket
• 1 x 2-Piece 2” Tri-Clamp with Silicone Gasket
• 1 x Stainless Steel Stand with Swing Handles
• 1 x Stainless Steel Handle
• 1 x Stick-On Strip Thermometer
• 1 x Volume Indicator Label (Litres & Gallons)
• 1 x Spare Lid O-Ring
• 1 x Spare Collection Container O-Ring

Take full control of your fermentation process with the Ferminator Basic Kit 2, and experience a new level of precision in homebrewing!

*Tested with Ferminator at a room temperature of 20°C. Additional cooling/heating units may be required when using expansion modules.